Playhouse for kids plans is a woodworking project that will satisfy them, and at same time you as well. Will show you how to build a wooden playhouse for your garden and create a beatifull place where the kids can play.
You will learn how is it is make a playhouse with basic playhouse plans.
Beside several basic woodworking techniques, you need to select the material with great care, take accurate measurements and cut the components properly.There many plans and designs you can choose from, but you should select the playhouse plans that fit your needs, tastes and budget. Therefore, you should decide from the very beginning if you need a large or a small playhouse, or if you need to build footings or a concrete slab. If the soil structure is weak and if you live in an area with strong winds, you should build a concrete slab. Otherwise, it is enough to pour several footings, every 3-4′, as the provide enough support.
In most of the cases, you don’t need a building permit, but we recommend you to visit the local building department, in order to obtain all the needed information. By consulting the legislation, you will find the space you have to leave from the fence, or the ideal depth of the footings. All these aspects are important when building any structure in your backyard, therefore make sure you comply with the local regulations,
In order to build a wooden playhouse, you need the following:
- 2×6 joists
- 2×4 studs
- 4”, 6” long nails / screws
- tube forms
- joist hangers / corner brackets
- cement, sand, gravel
- 3/4” and 1/2” plywood
- asphalt shingles
- hammer, spirit level, carpentry pencil
- safety gloves, glasses
- circular saw, jigsaw
- posthole digger
- power mixer
- lay out the playhouse like a pro, using batter boards and string
- plumb the walls using a spirit level and braces
- predrill holes with a drill machinery, before inserting the screws
- two weekends, two workers
Free wooden playhouse plans
The first step of the project is to lay out the wooden playhouse plans properly, in order to obtain a professional result. Therefore, you have to build four batter boards from 2×4 wooden boards and to place them as in the image. Measure the diagonals of the contour, to check if they are equal.
Smart tip: Adjust the position of the boards and the string, until the corners are right-angled (use the 3-4-5 rule on each corner).
Next, build the footings or the foundation of the playhouse, to support the frame of the playhouse’s floor. The first option is to build several concrete footings, as you can see in the image, ideal for light constructions placed in areas protected from strong winds.
Dig 1-2′ holes and place tube forms or build wooden form. Afterwards, pour a 4” layer of gravel and fill them with concrete.
On the other hand, if you want to build a sturdy surface to support the wood playhouse, you should take into account pouring a concrete slab. According to to the soil structure, you have to dig about 10” in the ground (at corners you might have to build pillars).
Build a basic formwork and place inside it a rigid structure of rebars. Pour concrete and level it with a straight edge, along the sides of the form.
You can build the floor of the construction in several ways, but we recommend you to follow our free plans. As you can see in the image, you have to lay the 2×6 sill into place, making sure they are perfectly level and aligned properly.
Next, install the rim beams and the floor joists. Insert galvanized screws through the perimeter beams in the joists and in the bottom plates, to build a rigid frame.
In addition, if you want to do a professional job, we recommend you to use metal hardware, such as corner brackets or joist hangers. Irrespective of your choice, align the joists at both ends before securing them into place, making sure they are equally spaced (16” OC).
Smart tip: Plumb the beams before installing them into place, otherwise you won’t obtain a perfectly horizontal surface.
Afterwards, you have to fit 3/4” plywood sheets over the beam and lock them into place with decking screws. Work with great care and attention, making sure the sheets are installed properly and aligned on all edges.
Smart tip: We recommend you to use tongue and groove plywood, as the sheets would join together easier. In addition, you have to drive in screws every 6”, along the joists.
Next, you have to build the walls on the ground, and set them into place by inserting 6” screws. In order to get the job done, you have to use 2×4 lumber and a nail gun. In addition, we recommend you to cut the lumber to the right dimension, using a circular saw.
As you can see in the image, you have to place the wall frames into place, plumb them with a spirit level and lock them with several 2×4 braces.
Use our wooden playhouse plans free to build the walls, but you should know that you could adjust these dimensions to fit your needs and tastes. Nevertheless, we recommend you to place the studs every 16” OC, as to obtain a rigid structure.
Don’t forget to fit 2×4 nogging and to leave enough space to install the windows. When installing the wall frame into position, drive 6” screws trough the bottom plate directly in the rim joists.
As you can see in the image, you also have to leave enough space to fit a door and possibly another window, if you want to let more light in the playhouse.
Smart tip: From our own experience, we recommend you to build the wall structure on the ground and afterwards install it on the floor with the help of a friend. There is no reason to hurry with the construction, if you want to obtain a nice result.